7 Dirt Cheap Homemade Fire Starter Ideas

Starting a fire can be challenging, especially when conditions are less than ideal. That’s why any sensible prepper must have a stash of firestarters in their bag to make it easier and faster to get a fire going.

Firestarters are a godsend. They’re not only quick to light—they also burn long and hot enough for you to get a fire crackling. The best thing is you don’t have to shell out hundreds of dollars to get a decent firestarter. Some very effective ones can come right out of your kitchen or backyard, and you can definitely make DIY firestarters at home.

Here are 7 homemade fire starter ideas to get you nice and toasty for your next outdoor trip:

Egg Carton Firestarters

This is the poster child of all firestarters. Egg carton firestarters are a staple in many a bug out bag. They’re highly combustible, very easy to make, and like most DIY firestarters in this list, they cost virtually nothing.

As shown in the video above, all you need for this homemade fire starter is an egg carton, some dryer lint, and melted wax. Take the egg carton and put some dryer lint into each cup. Pour some melted wax into the cups and let it dry.

Once done, cut each individual cup. Congrats, you now have a dozen firestarters! Easy as pie, right?

If you’re up for it, you can take an extra step and make these firestarters waterproof. Instead of pouring the wax into the egg carton, you can cut them up first into individual cups. Take one cup (already stuffed with lint, of course) and tie it up with some dental floss. Dip it into a pot of melted wax and let them dry. This way, each cup would be coated with wax and you can be sure that they stay dry, even in the worst weather.

See full instructions for waterproofing your egg carton firestarter here.

Homemade Fire Starter Logs

The first rule of fire-starting: if it’s got dryer lint, it’s bound to light up. Firestarter logs are basically a variation of the egg carton firestarter; the only difference is this DIY firestarter uses a toilet paper roll instead of an egg carton.

Simply stuff your roll with dryer lint and pour a generous amount of wax into it. Make sure to pour into both ends of the roll. You know you’re done when it’s good and dry. You can use the entire roll to start your fire or cut the log in half to expose the fibers before lighting it up.

Drinking Straw Firestarters

Using cotton balls soaked in vaseline or petroleum jelly is probably the cheapest way to make a DIY firestarter. Adding a drinking straw to the equation takes this trick up a notch by making your firestarters more compact, visible, and waterproof.

What you do is take a drinking straw and cut it to make around four pieces. Take one piece of straw and seal off one end with a pair of pliers and a lighter. Next, take your soaked cotton ball, pull it apart a bit, and stuff it right down the drinking straw. You can use a stick or a small screwdriver to do the stuffing.

Once you’ve done that, you can seal the other end of the straw. It’s that simple.

If you’re ready to use your firestarters, simply cut off one sealed end and expose those cotton fibers. You’ll be able to light up a fire in no time. You can easily make dozens of these homemade firestarters with just a handful of straws. They’re ultralight and take very little space in your bag, too.

Pine Cone Firestarters

People usually dismiss pine cones as nothing but squirrel food or holiday ornaments. They’re also the bane of many lawnmowers across the country. But did you know that a pine cone makes a good homemade fire starter?

Pine cones are wonderfully flammable. With little work, you can turn them into handy firestarters. To prepare, you’ll need some dried pinecones (make sure you bake them first), some candle wax, and string.

You can even throw in some food coloring to make your firestarters a bit festive. Simply melt the wax in a crockpot over low heat. Dip the pinecone once for priming. Wait for the first layer of wax to dry off before dipping the cone again. Make sure the wax coats the cones thoroughly. Let it dry, and you’re good to go.

Fire Discs

Cotton pads are great to have in a bug out bag. They’re super absorbent and can be used in disinfection and first aid. They’re also wafer-thin and very fibrous, making them ideal firestarters. With some wax and lamp oil, you can turn these first aid kit staples into a “fire disc.” Simply melt some candle wax and add some lamp oil into the mix. Then take your cotton pads and dip them into the mixture.

Set them aside to dry. The melted wax keeps the cotton from getting wet and helps it burn longer. To use this homemade fire starter, all you gotta do is tear the disc in half to expose all those flammable cotton fibers and light them up. You can store them in a waterproof zip bag and they will be good to go.

Self-Igniting Firestarters

Just when you think you’ve seen it all, a cool innovation comes. This self-igniting firestarter combines at least two elements needed to start a fire: the ignition source and the accelerant. To make a self-igniting firestarter you will need a strike-anywhere match, tissues, and the ever-present melted wax. Wrap the tissue around the match, then dip it into the wax.

The result is a nifty homemade fire starter with its own ignition source that can burn for several minutes. It’s like a match on steroids.

Sawdust Muffins

Sawdust is dry and fibrous, making it very flammable. If you mix it in with some wax, dryer lint, and a bunch of cotton balls, you’ll have a very potent firestarter.

To make these, whip out your muffin tin and line it. Next, put a mix of sawdust, dryer lint, and cotton balls into each cup. Pour melted paraffin wax into it and wait for it to dry. This DIY firestarter looks like a modification of the egg carton firestarter minus the tough cardboard. It doesn’t hurt that the sawdust muffins do look like the real deals, too. Just make sure nobody eats them!

Final Thoughts

Building a fire in bad weather is a tough job. Imagine shivering in the rain, desperately hoping that your sliver of flame lasts long enough for you to feed some kindling into it. Just when you thought it would hold up, it sputters and dies.

The frustration of not being able to keep a fire going can drive even the most seasoned preppers nuts, so it’s always best to keep something that would make fire building a tad bit easier and faster, especially if time is of the essence.

This is where a homemade fire starter comes to save the day.

Keeping a firestarter in your pack not only lends convenience; it also increases your chances of survival. It’s very easy to make and costs next to nothing. There’s no reason a prepper should be caught dead without a stash or two.

Just make sure to exercise safety at all times when making any DIY firestarter. Always use a double boiler when you’re melting the wax. Melting them over direct fire is otherwise hazardous and should be avoided at all costs. Lining your workspace with wax paper makes the cleanup easier, too.

Well, that’s about it. Any other cool homemade fire starter ideas you want to share? Let us know in the comments below!

Advertising and Affiliate Disclosure

We put a lot of effort into all of the content on tactical.com. We are able to provide this content for free because we earn money for advertisements on this site. We also earn small commissions for sales generated via our affiliate links. While these commissions do earn us income, they do not cost our readers anything additional. Clicking on our ads or links helps support our staff and we sincerely appreciate your support.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.